{"product_id":"eld-connection-plate-kit","title":"ELD Connection Plate Kit for Conductive Mesh","description":"\u003cp\u003eThe termination point for a conductive mesh installation. The kit carries the mesh's electrical connection up through the roof assembly to a weatherproof box above the membrane, so Electronic Leak Detection equipment can be connected without disturbing the roof.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA conductive mesh installation is not complete without a connection point.\u003c\/strong\u003e If you are ordering mesh, you need at least one of these.\u003c\/p\u003e\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePVC base\u003c\/li\u003e\n\u003cli\u003eConnection plate with attached lead wire\u003c\/li\u003e\n\u003cli\u003eRedundant lead wire, separate coil\u003c\/li\u003e\n\u003cli\u003eElectrical box with waterproof cover\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat you'll also need — not supplied\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3\/4 in PVC electrical conduit\u003c\/li\u003e\n\u003cli\u003ePVC electrical conduit solvent cement\u003c\/li\u003e\n\u003cli\u003eDeck fasteners appropriate to your deck material\u003c\/li\u003e\n\u003cli\u003eDrill with 1\/4 in bit\u003c\/li\u003e\n\u003cli\u003eWire stripper\u003c\/li\u003e\n\u003cli\u003eAluminium foil tape\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow it installs\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eFasten the PVC base to the roof deck with fasteners suited to the deck material.\u003c\/li\u003e\n\u003cli\u003eCut 3\/4 in conduit long enough to reach from the deck to \u003cstrong\u003eat least 18 in above the finished membrane\u003c\/strong\u003e, and glue it into the base.\u003c\/li\u003e\n\u003cli\u003eGlue the electrical box onto the top of the conduit.\u003c\/li\u003e\n\u003cli\u003eBuild the roof assembly around the base and conduit, \u003cstrong\u003estopping at the top of the insulation\u003c\/strong\u003e — do not install cover board or membrane yet.\u003c\/li\u003e\n\u003cli\u003eDrill two 1\/4 in holes on opposite sides of the conduit, level with the top of the insulation.\u003c\/li\u003e\n\u003cli\u003eFeed the connection plate lead and the redundant lead up inside the conduit to the box, coil the slack neatly, and fit the waterproof cover.\u003c\/li\u003e\n\u003cli\u003eLay the conductive mesh across the insulation so it sits \u003cstrong\u003edirectly on top of the connection plate\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eStrip 6 in from the end of the redundant lead and weave the bare wire into the mesh.\u003c\/li\u003e\n\u003cli\u003eCover the bare wire and the plate with aluminium foil tape to hold everything in position.\u003c\/li\u003e\n\u003cli\u003eComplete the assembly and flash the conduit penetration per the membrane manufacturer's specifications.\u003c\/li\u003e\n\u003c\/ol\u003e\u003ch3\u003eHow many do I need?\u003c\/h3\u003e\u003cp\u003eAt least one per monitored area. Where a roof is divided into separate test zones, each zone needs its own connection point. Where the mesh is bonded to the grounded structure rather than acting as the sole reference, connections are made at several locations — plan accordingly.\u003c\/p\u003e\u003ch3\u003eFreight\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003ePrices exclude freight.\u003c\/strong\u003e Shipping is quoted per order based on weight, quantity and destination.\u003c\/p\u003e","brand":"Atlantic Testing Services","offers":[{"title":"Complete Kit","offer_id":48954827571354,"sku":"ATS-CPK-001","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0765\/4896\/4506\/files\/plate-top.png?v=1785888460","url":"https:\/\/conductivemediums.com\/products\/eld-connection-plate-kit","provider":"Conductive Mediums - Mesh and Primer","version":"1.0","type":"link"}